Faux Finish Archives

Decorative Concrete Pillars | Resurfacing Concrete Wall Blocks Lake Ozark

What this week, we’re in Lake of the Ozarks Missouri. This is Rick with Custom Concrete Design. We’re down. Horseshoe been here. We’re gonna be working on this. Well, it’s, two pillars. Just just the driveway pillars am four, but they just want the front ones done here in front of the house.

So we’re gonna. Do both of these already got everything prepped up and ready to go for some concrete, a little patchwork, but we’re gonna do a real light gray on the majority, probably 90 % of it. The other 10 % is gonna, be a little bit darker gray, just on this front facing here this little border.

So already for some concrete, you go ahead and get this stuff on. Ok, we ‘ Ve got the base coat on the two pillars here, so we are ready to go for another base coat tomorrow. I’m gonna spray. That long and then we’re gonna make that trim a little bit dark for tomorrow.

That goes around where I’ve got that taped off right there in the front a little bit darker, I’m gonna spray it on tomorrow. Okay, we just put our third base coat on our third coat of concrete.

I should say that’s, the texture coat, which is a knockdown finish, and we just finished up our third coat on the trim, so the trim is a little bit darker than the rest of it. I put our final coat texture coat on earlier today, and we just put that darker coat on there finished up about 30 minutes ago.

So we’re, just letting it dry still wet. It will lighten up some, not a lot, but it will lighten up some over here. We sprayed this one first and you can SEE WHERE THIS ONE IS lightening up already, because it looks splotchy.

You see the dark spots, you see the light spots so that light area is actually dry right now, but that will darken back down as we seal it. Tomorrow I’m going to come back and seal this thing. This will darken down a few shades too, but it’s.

You know it’s completely dry and then this will. This will actually go back to the darker shade. Once it’s sealed, but it dries quite a bit lighter so anyways, as you can tell you know this one is considerably darker over here, but they turned out pretty nice.

I’m happy with them. Okay, this job is done and put sealers on yesterday to coat the sealer and the clients put the fixtures back on top sometime this morning. I guess that’s, the big light that I was talking about, the chrome band around the perimeter on that top slab, that’s.

Why we left that you know we didn’t code, it so we just wanted to seal. It looks nice and clean now, if you guys are watching this on youtube. Please subscribe to my channel like the video. If you liked it leave me a comment, let me know what you think and we’ll, see you guys on the next job, thanks for watching.

Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.

All right see you guys on the next one.

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting My Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

 

 

 

 

 

 

  

 
 
Source : Youtube

Decorative Concrete Tuscan Slate Brick Boarder Antique Taupe Patio Custom Concrete Lake Ozark

Hey this is Rick with custom concrete design at Lake of the Ozarks. This week we are in Westphalia Missouri. We’re, going to be doing this patio right here. It’s about a thousand square feet wraps around the other side of the house over there, but we’re just going to come to this cold joint.

We’re, going to stay to the left side of it. We’ve already started doing the grinding. As you tell there, you can probably see a lot of the white drain marks where we’ve been, but those those are where the cracks are.

How will you guys can see this on a video or not? It’s kind of hard for me to tell exactly where it’s at till the Sun and shadows here, but there’s, some repairs that have to be done right here along this cold joint there’s another pretty good-sized crack right here on the corner.

It’s, not long, but it’s kind of wide. This is probably the worst one that we’ve got this just wraps on around where there’s a couple more cracks over here. You business owners pinning him between a desk and a vehicle show.

This job here in Westphalia Missouri, is now complete. We’ve got our brick borders everywhere, camouflaged our joint lines, Tuscan slate texture, finish: colors are taupe a little bit darker on the base coat a bit lighter on the topcoat.

Then we sprayed it with some antiquing stain same color, taupe spray, the border. All the brick, I should say, sprayed it through our hopper gun and we hand painted quite a few bricks, while we have various colors shine on it, a little bit closer view here.

Take you to my Facebook page. You can check that out and also take you to my website. Entryways. Looking good [ Music ] see you guys on the next project:

Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.

All right see you guys on the next one.

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting My Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

 

 

Decorative Concrete – Tuscan Slate Antique Chocolate Interior Flooring Lake Ozark

Hey this is Rick with custom, concrete design in Lake of the Ozarks Missouri. This week we’re over here in Eldon, we’re gonna be working on this kitchen dining room area. In here we’ve got to take and pull up this linoleum here, and this is basically their little office area right here, not sure what that area there’s for washer and dryer kind of a laundry room office area.

So we’re gonna pull all this up and do this whole area as well, and here’s, their dining room area can ‘ T really tell how good it come. Gon na shape the concrete’s in just because mainly we’ve got it still crying.

What what’s here, we’re gonna grind it off grind it down, grind it off and then kind of see what’s underneath this glue, I may have some cracks. I know there’s already a couple little spalled areas that we’ve got to repair, but we’re getting the ground down.

Now I still got to go around all the edges and pull up that linoleum there and then in here we ‘ Ve got some quarter-round that we ‘ Ve got to pull off the baseboards because we’re gonna. Do this entryway here into that closet there, so we’re gonna get started.

Okay, I’m gonna make this one real, quick. We basically have the prep work all done all the grinding cracks repaired. Spall’s! Carpet holes all of its repaired so right now we’re, just mixing up some concrete and we’re gonna put on our.

I should place slow it down a little bit. We’re gonna put on our first base coat, but, as you can tell it’s ready to go nice clean, you know we had all that linoleum that had to be pulled up and glue, and so we had a couple Of days of prep work, but you just never know when your opponents, you know another flooring off at the top of your concrete which what you have below.

So we had to give this a couple days: uh two days of prep, so first bucket of base coat dark, chocolate is down at the kitchen, dining room is done and laundry room is done, but we got about half the kitchen and there’s.

Ever stopped, so we’re mixing up a bucket now – and I finish this out. Okay, we got this job complete came in here. We had to pull up some linoleum find everything down, get all the glue off make some repairs.

Some pop marks pulls back, got it all up there, a couple of base coats down little dark chocolate and that’s, the dark you’re. Seeing and then we get a Tuscan, suede texture finish, and then we sprayed it down with an antique chocolate stain and yesterday we came in and came in and put a clear coat of the epoxy over the top of it.

It’s, a nice high-gloss epoxy. They’ll, not shine more to fast 20 reflections along. If you guys are watching this on youtube. Please subscribe to my channel, like the video hit that little thumbs up down there.

If you like it and then leave me a comment, let me know what you think: if you’re watching this on my website, then you can always click over and watch it on YouTube and get subscribed to my channel. So you don’t miss any of my videos and there should be a couple of links underneath this video to it’ll.

Take you to my Facebook page. You can check that out and also take you to my website. Entryways. Looking good see you guys on the next project: [ Music, ], hey! This is Rick with custom, concrete design in Lake of the Ozarks Missouri.

This week we’re over here in Eldon, we’re gonna be working on this kitchen. Dining room area in here we’ve, got to take and pull up this linoleum here, and this is basically their little office area right here, not sure what that area.

There’s for washer and dryer kind of a laundry room office area, so we’re gonna pull all this up and do this whole area as well, and here’s, their dining room area can’T really tell how good it come. Gon na shape the concrete’s in just because mainly we’ve got it still crying.

What what’s here, we’re gonna grind it off grind it down. Grind it off and then kind of see what’s underneath this glue I may have some cracks. I know there’s already, a couple little spalled areas that we’ve got to repair, but we’re.

Getting the ground down now, I still got to go around all the edges and pull up that linoleum there and then in here we ‘ Ve got some quarter-round that we ‘ Ve got to pull off the baseboards because we’re gonna.

Do this entryway here into that closet there. So we’re gonna get started. Okay, I’m gonna make this one real quick. We basically have the prep work, all done all the grinding cracks repaired. Spall’s, carpet holes all of its repaired.

So right now we’re, just mixing up some concrete and we’re gonna put on our. I should place slow it down a little bit. We’re gonna put on our first base coat, but, as you can tell it’s ready to go nice clean, you know we had all that linoleum that had to be pulled up and glue, and so we had a couple Of days of prep work, but you just never know when your opponents, you know another flooring off at the top of your concrete which what you have below.

So we had to give this a couple days: uh two days of prep, so [, Music, ]. First bucket of base coat dark, chocolate is down at the kitchen, dining room is done and laundry room is done, but we got about half the kitchen and there’s ever stopped.

So we’re mixing up a bucket now – and I finish this out: [ Music, ]. Okay, we got this job complete came in here. We had to pull up some linoleum, find everything down, get all the glue off make some repairs.

Some pop marks pulls back, got it all up there, a couple of base coats down little dark chocolate and that’s, the dark you’re. Seeing and then we get a Tuscan, suede texture finish, and then we sprayed it down with an antique chocolate stain and yesterday we came in and came in and put a clear coat of the epoxy over the top of it.

It’s, a nice high-gloss epoxy. They’ll, not shine more to fast [, Music, ], [, Music, ] 20 reflections along [, Music, ], [, Music ] – if you guys are watching this on youtube. Please subscribe to my channel, like the video hit that little thumbs up down there.

If you like it and then leave me a comment, let me know what you think. If you’re watching this on my website, then you can always click over and watch it on YouTube and get subscribed to my channel. So you don’t miss any of my videos and there should be a couple of links underneath this video to it’ll.

Take you to my Facebook page. You can check that out and also take you to my website. Entryways. Looking good [ Music ] see you guys on the next project:

Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.

All right see you guys on the next one.

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting My Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

 

 

Concrete WOOD Resurfacing 👷 Step by Step 👷 WATCH as we CREATE Decorative CONCRETE Wood

 

 

This week we’re down horseshoe bend in Lake of the Ozarks here we have a walkway that leads over here to the garage, and over to the front stoop. I need to take this overlay off it’s broke up pretty good, and pretty damaged, it almost looks like they put it over a slab of rock or somethin, and it could be a couple of coatings, It’s got a lot of cracks and damage to the to the slab it’s in pretty bad shape, so with that said I decided to take my hammer and chip that off, it appears to be hollow up underneath there in that particular area.

There’s a few cracks and some water where they water their plants. So if that water’s gotten up underneath it there, there’s probably A good chance that a lot of this underneath here is very lose and hollow, so i’m gonna go ahead and start grinding this off and see what we’ve got up underneath.

Okay, we’re, going to pick up where we left off on this job. They’ve got this slab repoured and it’s ready for an overlay now. So I’m grinding the rest of it off over here as you can see where I stopped. I cut that line across here and they redid this area of their concrete, now i’ve got to come in here and grind the rest of this concrete overlay off that was on here which you can see i’ve already started that.

 

What the white is i’m. Taking that down to the original concrete i’ve got to bring it down there’s about a half inch lip that i’ve got to go ahead and and get you know, get down flush, maybe a half inch Or so, and we’ll, probably slope it back about a foot and a half, so it’s, got a nice slope to it, yeah other than that.

This is what we’ve got to start with. Today we’re gonna, hopefully get everything ground down today and come in and do our first base coat tomorrow. The finished look is gonna, be a wood plank oh luke! I am your father.

Okay, it’s day. Two on this concrete wood project down horseshoe bend and lake of the ozarks. This is rick uh. We just got the base coat on finished. The grinding put the base coat on. It looks kind of spotty right now because it’s drying up uh.

It’s, getting kind of warm out here and you know wind’s blowing pretty good, but this is a base coat. It’s. Actually going to be darker than this, but i didn’t want to go in with a white base coat, so i added some color to it, but you can see how much it is uh drying right there and that’s, where I started it gets a little bit more solid here.

I’m, probably going to wind up going with a second coat and it’ll be darker and you can see where it’s more and more solid. As far as a darker color goes because here’s, where i stopped, but i’ll actually do a shade, or maybe three shades darker than that.

I want it to be pretty dark um, because when we put our wood pattern down and pull our tape, this is the grout coat that you’re gonna see that’s. That’s, the color, but you know it’s, going to be almost black uh real dark.

You know charcoal so um. It always lightens up several shades when it is drying, but it always goes back to a darker color. So here’s, where we’re at right now on stage, um got several steps to go, but we should be done with this next wednesday or thursday and right now.

I believe this is may 2nd wednesday, so anyways that’s. What we got for now, all right. We got our second base coat on a little bit darker this time. So this is the color that you’re, going to see, probably actually even darker than this, once we put stain on it seal it.

You know, of course, that after the wood texture goes on it, but this is uh a little bit truer to the color, so it just went down still a little wet. It will dry light, but it ‘ Ll go back to this color when it’s done, but it’s.

Uh. It’s, a lot more solid, now um starting to dry up here and there. So there might be. I don’t know if it’s shadows or it’s, just drying up in certain areas, but there you go second base coat is down okay.

We now have the fiber tape over our two base: coats. All the wood planks have been measured out. Everything’s, hand, taped four, six and eight in the width. The length is just kind of random. I really don’t want a pattern:- i’ll, be in monday spray over the top of this, with the grout coat color.

That way, we lock that tape down and get it sealed off. Because tuesday, we’re, going to be doing the texture wednesday. We’re, going to be staining and thursday. We’re, going to lock this thing down seal.

It up and get home. Okay, we’ve got our tack coat on. You can still see the tape ghosting through the tack coat of concrete because it’s, just a thin layer, We’ll, come back in tomorrow morning with the texture coat, so it almost doesn’t.

Look like the uh. Almost doesn’t. Look like there’s anything over because you can still see that tape quite a bit, but tomorrow you will not see this tape. I’ll bury it tomorrow and then i’ll, pull it up probably tomorrow afternoon, and then we’ll stain it wednesday.

Okay, we have the wood texture coat on here uh. We just do this coat in a white because uh tomorrow we’ll, come in and pull the tape. The pattern tape that’s underneath of it and um. You know, then, you’ll, be able to see the texture a lot better and, of course, the pattern once the tape’s pulled, but we do it white, because we’re, going to color it with a couple of Different colors tomorrow so that way we just got a clean slate to begin with. It just works better if it’s done on a white base and i don’t know. If you can see this very well or not a lot of shadowing here, but it’s really hard to tell what the texture looks like.

Let me get a little closer. It’s kind of so bright out here that it’s kind of bleeping everything out. Let’s. Try here, all right, so that’s. What we have for now? Okay, it’s, cleaned up and ready for some color.

All the tape’s been pulled. It’s, been cleaned up, joint lines, open back up it’s, been edged up against the driveway. Everything’s, nice and clean there. All the nail holes have been drilled, so every plank has two nail holes on each side of it: four per line that’s where the planks meet and they are staggered, um uneven on purpose.

We want this to look as authentic as possible. Perfect imperfection, if that makes sense, so i’m, getting ready to come in and just hit those nail holes with some darker color to make them completely black.

And then we’Ll start the coloring, which is going to be brown and amber, okay. This is before the sealer goes on, but the color is all done, cleaned up it’s, ready to go actually started sealing it up top, but i stopped to take this video real quick.

This is how the color turned out again. This is before the sealer i’ll. Do a final after the sealer’s on! Let me know: does that look like wood about as close as i pretty much can get it there’s.

Different, looks different colors a little bit different patterns that you could do with it. But overall i think mission accomplished. Okay, this job in four seasons is complete.

I think wood is done. got some nice texturing real nice coloring just goes uh perfect, with the setting they’ve got here. Now they have the house decorated,. You know the big wood beam pillars and the front door, all rock it’s, just a real rustic look.

So let’s, just kind of finished it off. This is going to run all the way over here to the front stoop, i mean sorry, i didn’t want to do anything with that drain other than just do a picture frame around it.

I didn’t want to drop any lines in it because it’s. Such a small area can’t, keep our wood look for the most part on the side wall from the twin stoop area. That will look really weird, i think, with a bunch of lines running through it, especially with that grate.

We just got some really nice, texturing and coloring here see if i can get a little closer, so you guys can see it. We have to keep the joint lines open so that’s. What that is, you can’t fill those in because the concrete wants to expand in the winter months well, winter and summer, so that concrete has to move.

So we got ta leave those expansion, joints open, yeah, sun kind of gives you a little bit different perspective. It does bring out the color, but it also kind of makes it look a little bit different than what it really is too.

That’s. Why it looks so different over here, more it’s covered up in the shade versus out there right in that bright song, so the rest of it does look like this. It’s, just the sun just kind of blends it together.

More, let’s. Look at this texture, since we’re in the shade here and the coloring, also drilled in every plank. There’s, okay, that’s about it. For this one, you guys are watching this on youtube.

Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.

All right see you guys on the next one.

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting My Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

 

 

 

Decorative CONCRETE PATIO Resurfacing | Antique STAIN Lake of the Ozarks

Hey: this is rick with custom, concrete design and lake of the ozarks. This week we’re over in porto sema and it’s. On the other side of the lake, we’re, going to go ahead and start grinding.

This area right here getting set up for the grinding. What we’ve got here is concrete paint and we ‘ Ve got to take that off before we put our overlay on it. The concrete’s in pretty good shape.

I don’t, see any cracks or anything there might be a couple hairlines we’ll, see once i take and grind this concrete paint off of here, but you know the concrete’s in really pretty good shape. The paint bubbled up in these areas here and you can see where it’s chipped off, but it’s.

It’s mainly out here in the screened in area. It’s, pretty good. We’ve got to take all that off. First, all right. This job in portusema is [ Music, ], complete [, Music, ], so [, Music, ] foreign [, Music, ], [, Music, ], okay, just a little bit outside this screened in area.

To do right here on this outside lip just a little strip about three inches wide. I don’t know how long, but it’s nice and clean. We’ll go out here to the outside deck. I’m gonna try to keep it out of the sun because it changes the way this looks so i’ll.

Show you the area here in the shade, and maybe a quick glimpse of in the sun over here. The rest of it looks like in here underneath the shade, but that sun just changes the way it looks so go buy that real, quick, [ Music ].

If you guys happen to be watching this on my youtube channel, please subscribe to my channel like the video. If you like it, leave me a comment, let me know what you think below the video in the description is my website and my facebook page go check out the website for a little more information on what it is that i do and my facebook, if you Want to go over and check that out there’s, a lot of pictures and videos there as well got about 3 000 likes on that page.

So if you like what i do go ahead and like that page as well and again, don’t forget to like this video. If you like it, subscribe and comment, and i’ll – see you guys on the next Project!

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting My Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

 

 

 Page 2 of 4 « 1  2  3  4 »