We started this Project with Concrete that was about 20 years of age, it had several cracks and some stained area’s, part of the concrete was just added within the last year, so the colors of the two slabs of concrete was way different, my client wanted to have the cracks repaired and make the New and Old concrete colors blend together and look as one single slab, and that’s exactly what we did.

Our First task was to do some grinding, open the cracks up and get them repaired, after that we had to get the concrete prepped and ready for a Brand New Overlay with some Acid Staining. The Base coats went down great and the two large slabs of concrete now looked like they were the same color, the texture was a rock trowel, once the texture was on we put plastic on the home and the screened in patio area.

Next step was to Acid Stain the entire surface to pull it all together and marbleize the surface, we used a Chocolate and a Charcoal Colorant to add into our Antiquing Stains, so we were looking for a taupe color, once we had the color blend we were looking for we started the Acid Staining Process.

The Final step was to Lock it all in with a Quality Sealer and make the concrete look new and revived, I believe we saved the home owner from having to tear out and re-place the entire slab of Old Concrete which would have cost about 20k, needless to say they were very happy, please enjoy the pictures located here I will have a Video up very soon.

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting my Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

Started this Project with a good slab of concrete, it had some imperfections, like a few cracks we repaired, some light grinding, and it was a little wavey here and there, but overall it was in good shape.

I started by addressing the cracks in the slab by opening up the cracks with my v-blade attached to my hand held 4 inch grinder, cleaned the crack out real well and repaired it.

More info below the Video….

I came back in ground down some of the extra repair material, pressured washed, acid etched, ammonia rinsed and then pressure washed again, this concrete was repaired and thoroughly cleaned!

The next Step was to start the overlay process, I began by laying out the first grout coat color, followed by the second grout coat color, we went with a medium tone Chocolate color for the grout.

Once the grout coat was established the next day we came back in and taped out our 10inch boarder, then applied our tack coat over the tape with the grout coat to seal the tape and prevent any bleed under. (Blocks the top coat color since its a different color all together).

Now we are ready for a different Color to lay over top of these 3 coats of concrete and the fiber tape that’s now embedded within the last layer of concrete. This coat is a light palomino color which is sort of a light greeish/beige color, but it look good as you can see in the Video above, its the same color as the Texture coat, which is next.

ok now its ready for some texture, we apply the texture all with a trowel, which is very time consuming, this step took all day, well most of it. Ok so now we are ready to mask off the entire deck area, meaning the railing and the condo area, because the next step is Acid Staining the whole deck.

Acid staining, ok here we go… 2 pump up sprayers one with acid stain (brown chem-stone cut 5 to 1) the other is for water to allow the acid stain to disperse evenly, first the water very lightly then spray some acid stain, this technique makes it feather out naturally, and marbleizes very nicely!

I had to wait a few hours for the stain to react to the concrete overly, so I thought well why not hit the gym and kill a few hours, so I did… yes I was feeling a little like Rocky Balboa lol… anyway I came back pulled the fiber tape under my 3 coats of concrete, reveled my grout coat color and my 10 inch boarder came to Life!

Last day was just to come in clean it all up real nice and start mixing the sealer, 1 st coat goes down very quick and the color just pops!!,,,the second coat really pulls it all together, locks it down and now its shining bright like a diamond, very nice gloss!!… This outside deck at Seascape Condo’s in Osage Beach, MO is now saved and will go on to live a very long and happy life!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting my Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

On this Garage Epoxy Floor Project we started by removing the existing flooring of an adhesive backed checker board linoleum, we started out prying and pulling at it but it was so brittle it was breaking off in small pieces, so I pulled out our handy air powered scraping tool, and it pealed it up like a hot knife would cut through butta!!……….more info under the Video.

Once all the tile was up we proceeded to grind the entire floor with our 95% dustless vacuum system this step was all completed within 2 days, we came back in the 3rd day and started mixing our Tan colored Epoxy resin, once the epoxy was all down, we moved to the next step of the process.

The next step was to toss on my spiked shoes quickly and grab my bucket of vinyl chips and get out there on the freshly laid down epoxy and toss my chips in the air (as you may have seen in the Video above).
once all the chips were thrown on top at 100% coverage, I had to take the rest of the day off, and resume the next day.

The last day, we started by scraping and brooming off any lose vinyl chips, clean it up real well. Then proceed to the mixing of the clear epoxy resin, once mixing starts its game on again!!

Once the Clear Epoxy was on, it was clean up time, because this Epoxy Garage Floor Project in Four Season Missouri was Complete!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting my Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

We Started this Residential Home in Porto Cima Sunrise Beach, MO Garage Floor Project with a Pretty Fresh Surface to work with, it had some paint, some oil, but for the most part was pretty nice to work with. We came in and Prepped the floor first by doing some grinding, removing the oil and paint/drywall mud, but once that was done, it was time to prep the walls with concrete tape.

Once we had everything prepped it was time for the Colored Epoxy which was a Med Grey color, once that was laid out I got my spiked shoes on and went out on the nice smooth like glass colored surface and proceeded to toss the chips up to cover the epoxy at a rate of 100%.

Last step was to lay on the clear epoxy to lock the base coats and vinyl chips in place. Pull out tape and clean up!

For More Information Please use the Contact form Located HERE

Thanks for stopping in lets talk soon…

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

Here We Have a Project at Mystic Bay Condo’s in Osage Beach,  Missouri.

My Blank Canvas of Concrete is Approximately 450sqft, we started by removing the railing, so we could grind some of the rough spots off of the surface, I call them concrete boogers or speed-bumps…lol.

 
The next step was to repair some of the cracks that were noticeable, some were hairline cracks, some needed to be opened up to remove all the lose particles of concrete that were floating around within the crack. Once opened up I mixed up the Epoxy with some silica sand and laid it in the cracks. I came Back the Next day and did some slight grinding over where the cracks were.

Then proceeded with our Decorative Concrete we lay out 2 base coats of Portland Cement with a Charcoal Colorant added in to the mix. This is my Grout Coat color you see.

Next step was to mark out my pattern of a 20×20 tile pattern on a 45 degree pitch, but first needed to establish my boarder of 10 inches all around the perimeter of the slab, once done I began to tape it all out with Strapping Tape.

Next came the Prepping of the walls so they don’t get spayed by the and the Tack Coat which I say in the Video (and Acid Stains), what that means is I simply mixed another bag of concrete with the same portion of colorant in it as the previous base coats, hooked up my compressor and hopper gun and sprayed the concrete on over the Strapping Tape, this is necessary for what we call in the industry as ‘Locking in the Grout Color’ to prevent any ‘BLEED UNDER” the tape from the 2 different colored Top coats and Acid stains going on to our Concrete Overlay in the next steps to come.

Next I mixed another bag of our Portland Cement with A color Called Palomino, this was squeegeed this on top of the Charcoal Gray Color (tack coat), once dry I mixed up more of the same color and then added my texturing, I continued to layer my coats with My Trowel until I had the look I wanted.

Next was to mix up the Acid Stains (Chemstone Acid Brown), once mixed I sprayed in a circular motion with a little water at first then the Acid went on over the water, this is to prevent any drops from the sprayer and it makes the acid feather out naturally on its on, this way it marbleizes much better.

Once Dry I pulled the Concrete Strapping Tape up to reveal my Pattern and the 2 Base Coats of Charcoal Grey, cleaned it all up real well, then I mixed up my sealers, and Locked it all down, here is where the coloring  just pops up and says HELLO!!

I hope you Enjoyed the Video, the Pictures and the brief description of the process.

For a FREE Consultation and Estimate, use the Contact Form Located here

Thank You for Visiting my Site

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design