google.com, pub-1613111081024165, DIRECT, f08c47fec0942fa0

Concrete Flooring Bathroom Floor Metallic Epoxy | Shower Floor Concrete Overlay Lake Ozark MO

 

 

Hey this is Rick with custom concrete design and Lake of the Ozarks Missouri this week we are in Barnet and we’re doing this interior bathroom.

Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.

All right see you guys on the next one.

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting My Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

 

 

 

 

 

 

  

 

 

 

Decorative Concrete Resurfacing Flagstone Condo Deck Lake Ozark

 

 

okay guys this week we’re in lake of the ozarks missouri down here at Palisades condo complex that’s a small deck it’s probably between 180 200 square feet I can’t remember it’s been a few months I bid it a few months ago when I bid it so well we’ve got bet all the grinding done I didn’t get my before video really so I guess this is it because there was a concrete overlay already on here and I ground it off already so as you can see we’ve got still one crack there to repair it’s a small hairline crack nothing major I’ve already got the you know the perimeter taped off I’m not gonna paper anything until next week when we start spraying but it’s ready to go for the most part right now for a base coat of chocolate concrete we’re gonna do a couple of base coats dark chocolate so that’s going to be our grout coat and then I’m gonna spray our top coat next week and over the top of that really light tan top coat is going to be a highlight to highlight coats one white one black I don’t know if I mentioned but the pattern is flagstone.

So anyways this is kind of our I guess you could say our before video I to these all the time but normally I do them before this so this is it so I’m gonna get started all right the next steps what we’ve done basically I skipped a few steps in the video process you know the last video you know you guys saw the bare concrete what I’ve done since then I put two chocolates base coats down and then I taped out today I taped out my flagstone pattern and papered off the perimeter all around the condo unit here in the screened-in area so right now I’m getting ready to put it out put on what we call a lock coat or a tack coat it’s gonna go down over the top of this tape and we’re gonna lock this tape down so that that that final color because it’s lighter we don’t want it to bleed up underneath the tape so the tack coat is going to be sprayed on next to prevent that and then of course we’re gonna once the tack coat is down we’re gonna put a very light tan over the top of this and this is actually pretty dark and I’ll show you what I mean when this is sealed it’ll be very dark brown like that but it dries extremely light so we’ll have a very light coat that’ll get sprayed over the top at the very end very light tan coat and then I’ll probably do a black and a white highlight over the top of that just kind of dust it with that so you can still see you can barely see the black and the white but you’ll you know it’ll give it a little bit of character and a little bit of depth so that’ll be the final step before we lock everything down with a seal coat on Wednesday and then it’ll be done of course and I’ll do a final video then so okay we’ve got this tat coat down over our flagstone pattern now as you’ve seen from the previous video just before this I had it taped out and ready to go for that tack code it’s over the top now you could still see the tape a little bit in spots but for the most part that uh that tape seal 

okay this job in Palisades yacht club condominiums like the use RX is finished just put the final coat of sealer on it about 30 maybe 45 minutes ago  so if you guys are checking this out on YouTube be sure and subscribe to my channel so you don’t miss out on all the future videos that I do give the video a like if you like it and you like it well enough to leave a comment good or bad just let me know I tried to include most the steps in this video didn’t quite get them all but maybe on the next one I’ll do an actual live well not live footage but some footage of me actually spraying the stuff on or laying it down with trial and be sure and check out the links in the description below the video here they’ll take you over to my website as well a lot more information there see you guys in the next project

Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.

All right see you guys on the next one.

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting My Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

 

 

 

 

 

 

  

 

 

Source : Youtube

 

Read More: Decorative Concrete Tuscan Slate Texture Brown Antique Stain Lake Ozark, MO

 

HIGH GLOSS Epoxy Garage Floor Vinyl Chips | Urethane TOP Coat Lake of the Ozarks, MO

Hey guys, it’s, Rick with custom concrete design and Lake of the Ozarks Missouri. This week we’re in Waynesville Missouri. We’re gonna be working on this garage floor. Floor is in good shape, but we’re gonna go ahead and shave off this top layer, get all the imperfections taken care of and wiped off of here.

Get it cleaned up and ready for some epoxy and chips it ‘ S got one crack here in the opening. I’m gonna go ahead and repair that, and then we’ll get started on the epoxy. Okay, we got this job in Waynesville.

Wrapped up, I can’t, go out there right now, because the urethane the final seal coat. Is it’s wet so breath? I’m just gonna get down this little step here and give you a decent view what I can anyways so the first day we ground it down, took off that top layer.

Patched everything up fix all our cracks put our base coat down. Second day and then through our chips on top, come back to the third day we get our pops eat, and then today we put on a couple coats of the urethane water-based.

You’re, a saint, so give you an outside view. They trim this out repaint it. We organize everything on the walls put the TV out here. I’m, not sure what else, but to make it look nice. I’m sure if you guys are watching this on youtube.

Please subscribe to my channel go to my website. The links are below my website and my facebook page. You can get a little bit more information there about the systems that I offer and everything I do there’s.

A lot more pictures there to you as well like the video. If you do like the work and leave me a comment, let me know what you think and we’ll, see you guys in the next video you.

Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.

All right see you guys on the next one.

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting My Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

 

 

 

 

 

 

  

 

 

Source : Youtube

Resurfacing a Concrete Patio and Breezyway⚠️Concrete Crack Repair⚠️Lake Ozark

All right this week, we’re in Lake of the Ozarks down in Four Seasons. This is Rick with custom concrete design. This is what we’ve got here. Is this breezeway right off the driveway and garage area? We’re gonna work on this and repair that crack.

I’m, getting ready to start the grinding, so I’m all set up with that ready to go. We’re gonna hit this little patio out here. We’re gonna come in here with a couple of base, coats, Tuscan slate texture and a antique stain.

I’m gonna. Do it at a taupe color. Try to match or get as close as we can to the side. All right, this job is complete. Take you guys for the breezeway real quick, add that cracking concrete in this breezeway right about here there let’s, build it! You guys watching this video on my youtube channel.

Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.

All right see you guys on the next one.

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting My Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

 

 

 

 

 

 

  

 

So you guys don’t miss any of these videos. We’ll, see you guys on the next project. You

Source : Youtube

Decorative Concrete Pillars | Resurfacing Concrete Wall Blocks Lake Ozark

What this week, we’re in Lake of the Ozarks Missouri. This is Rick with Custom Concrete Design. We’re down. Horseshoe been here. We’re gonna be working on this. Well, it’s, two pillars. Just just the driveway pillars am four, but they just want the front ones done here in front of the house.

So we’re gonna. Do both of these already got everything prepped up and ready to go for some concrete, a little patchwork, but we’re gonna do a real light gray on the majority, probably 90 % of it. The other 10 % is gonna, be a little bit darker gray, just on this front facing here this little border.

So already for some concrete, you go ahead and get this stuff on. Ok, we ‘ Ve got the base coat on the two pillars here, so we are ready to go for another base coat tomorrow. I’m gonna spray. That long and then we’re gonna make that trim a little bit dark for tomorrow.

That goes around where I’ve got that taped off right there in the front a little bit darker, I’m gonna spray it on tomorrow. Okay, we just put our third base coat on our third coat of concrete.

I should say that’s, the texture coat, which is a knockdown finish, and we just finished up our third coat on the trim, so the trim is a little bit darker than the rest of it. I put our final coat texture coat on earlier today, and we just put that darker coat on there finished up about 30 minutes ago.

So we’re, just letting it dry still wet. It will lighten up some, not a lot, but it will lighten up some over here. We sprayed this one first and you can SEE WHERE THIS ONE IS lightening up already, because it looks splotchy.

You see the dark spots, you see the light spots so that light area is actually dry right now, but that will darken back down as we seal it. Tomorrow I’m going to come back and seal this thing. This will darken down a few shades too, but it’s.

You know it’s completely dry and then this will. This will actually go back to the darker shade. Once it’s sealed, but it dries quite a bit lighter so anyways, as you can tell you know this one is considerably darker over here, but they turned out pretty nice.

I’m happy with them. Okay, this job is done and put sealers on yesterday to coat the sealer and the clients put the fixtures back on top sometime this morning. I guess that’s, the big light that I was talking about, the chrome band around the perimeter on that top slab, that’s.

Why we left that you know we didn’t code, it so we just wanted to seal. It looks nice and clean now, if you guys are watching this on youtube. Please subscribe to my channel like the video. If you liked it leave me a comment, let me know what you think and we’ll, see you guys on the next job, thanks for watching.

Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.

All right see you guys on the next one.

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting My Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

 

 

 

 

 

 

  

 
 
Source : Youtube
 Page 1 of 14  1  2  3  4  5 » ...  Last »