Comments Off on Epoxy Garage Floor w/Decorative Vinyl Chips Lake of the Ozarks MO
Here’s a Garage floor located in Camdenton Mo at Old Kinderhook, we profiled the entire surface by grinding off the paint and drywall material, cleaned it all up then started our Epoxy Garage Flooring System.
First we started by applying the Base coat of colored Epoxy which in this case was a light Tan color, once it was down we simply threw out Vinyl Chips (brown, beige, black, white), let it set for the day, came back in on day 3 and put on our protectorthan coat, final day was simply another coat of protectorthan.
Comments Off on Decorative Concrete Basement Floor Antiqued Charcoal Coloring with Epoxy Finish
Here we have a 640sqft Basement Floor that was in bad shape it had over 300 small and med size holes in the surface from pulling the carpet strips, it had black mastic in both bedrooms that was very stubborn to remove we had to grind the entire surface down the the bare concrete, once the grinding was done we discovered many cracks that were not detected until the grinding was finished, so we repaired all the cracks and there were alot of them.
Once we removed the mastic and repaired the holes and cracks we were able to start our cleanup, after clean up it was time for the base coat of concrete, the base coat went on very nicely and really made the floor look new again!
Next step was to start layering our texture, we did 2 top coats of a slighter lighter in color concrete but this was a 50/50 mixture the mixture we did gave us a less grainy feel and a more creamy smoother finish, coverage was at about 85% coverage, we wanted to create smaller pockets so we could see our first base coat which is basically how a Tuscan Slate finish is done.
Now that we have Texture it was time to paper everything off from any over-spray because it was time to start spraying our Antiquing Stain onto the floor, once the masking/papering was done we mixed our stain and poured it into a pump up sprayer and proceeded to spray the surface. We had to put 3 Antique coats down to get the correct shade.
It was now time for the High Gloss Epoxy Finish to make the coloring POP!!….The Epoxy went down as expected smooth and efficient and looked AWESOME!!
Comments Off on Epoxy Countertops – VS – Other Counter Top Options
Epoxy Resin Countertops
Resin is a type of solid surface countertop but with more variations. It is produced in a pleasing array of colors and textures.
Pros and Cons of Resin Countertops: On the plus side, resin counters are very durable, impact-resistant and very easy to clean. Most hold their color very well, even in direct sunlight. Small scratches or nicks can be sanded out of the countertop. Newer resin tops can be made with less pigment, giving them a semi-opaque, translucent quality. This is ideal for backlighting the countertops, giving them a very unique appearance. The key potential negative for resin countertops is the lack of consistent quality from brand to brand. Look for acrylic or Epoxy Resin Countertops and avoid polyester resin countertops.
We started this basement floor project with alot of prep work, the work included removing carpet, repairing cracks, removing some tile, patching in small holes where the carpet tacks were located along the whole perimeter of the entire floor, and grinding the everything, so we had our work cut out for us.
Once the prep work was done, we began the Decorative Concrete process, it started with our first base coat which was a very dark chocolate colorant with some charcoal colorant added in, then a second base coat of the same, which is pretty standard. Once the 2 base coats were down we taped out 1/2 inch boarder with our threaded strapping tape which was about 6 1/2 inches from the wall, the reason for the odd width of the boarder was to accommodate the 1/2 inch baseboard that the homeowner would eventually add back on after we were done and they had another coat of paint on the walls, this would bring the boarder to a 6 inch boarder in width around the whole perimeter of the entire concrete surface.
Now its time for more concrete we put a tack coat over the whole surface so that the next color coat would not bleed under the strapping tape, once that coat was on we came back in with 2 White coats of concrete (zero colorant in the concrete). After the first coat was down and dry we prepped the walls with paper and some area’s with plastic, then we proceeded with our second coat which was the texture coat.
Next was the Acid Staining, we wanted 2 coats of acid stain, first coat was a Umber color, sort of a yellow gold color, the second acid stain coat was a brown color, once I got the look I was after we let it dry and do its thing. Once it was dry we came in with an Ammonia wash on the entire floor and shop-vaced the water up, placed our fans on it and let it sit for 2 days and dry out real well over the weekend.
Came back and applied our Premium High Gloss Epoxy Finish to give it that nice super high gloss glass like look say that 5 times really fast :)…. laid it out and squeegeed it around then back rolled it. came back the next day and put down a Scratch Proof urethane coat once dry I shot this Video and snapped a few pictures of the finished look.
The Homeowners were very very happy!
Comments Off on Wicked New Floor DESIGNS Coming Soon!!
This bathroom floor had tile. We applied a polymer based concrete over the tile so we could start with a flat surface. We then resurfaced it with a Pearl Marble Glaze epoxy and added multiple acetone base stains. While the epoxy cured it gave us this really wicked design. The look is a little much for some people, but most everyone seems to love it.
This finish is perfect for Residential settings such as living areas, basements or garage floors. Perfect way to brighten and awe customers in commercial areas such as retail spaces, shopping malls, auto dealerships, medical offices, restaurants, or more!!
Limitless colors with a seamless look this finish is becoming a trend in retail, commercial and residential flooring. Metallic Marble is industrial grade that is durable in high traffic areas and easy to clean with scratch and slip resistance options.
