Expert Epoxy Flooring in Central Missouri

Custom Concrete Design is Central Missouri’s #1 choice for the highest quality residential garage flooring and commercial garage floor coating solutions. With our high priorities on customer service, professionalism, affordable prices, exceptional high quality products, outstanding workmanship and extraordinary attention to detail and surface preparation, Custom Concrete Design is determined to exceed your highest expectations.

Custom Concrete Design employs a cutting-edge, epoxy floor coating solution which creates the most brilliant shine while far exceeding the durability standards of most flooring products. Easy to clean, resisting stains, harsh chemicals, and tire skid marks, our coatings are extremely durable and maintain a long lasting shine.

Epoxy Coatings with Decorative Flakes (or Chips)

The most common garage floor solution is an epoxy floor with decorative flakes or chips. There are several benefits to adding these to your floor. They are a great source of traction and do not make your garage floor slippery. It is generally less slippery than your normal concrete when wet. With concrete slabs come imperfections in the finish – this means low spots, waves, etc. Normally you can see these imperfections well, however, when a gloss epoxy coating is applied the imperfections are brought to light. The flakes will hide these imperfections and make your floor look beautiful! And, not to mention, the flakes come in many sizes and hundreds of color combinations so you can pick the colors you like best!

After the flakes/chips are on the floor at a 100% prod-cast, we seal them in with a super high-gloss performance clear epoxy coat and gives that WOW factor!

MORE pictures located here.

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting my Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

Recently we decided to experiment with making our Decorative Concrete appear to look like a different type of concrete, normally we do alot of concrete that looks like Tile, cobblestone, flagstone, brick….. but never have we attempted to make our Decorative Concrete look like BARN WOOD PLANKS.

UNTIL TODAY!!

Please leave me your comments and let me know what you think of this NEW LOOK we have created,,, no no I’m not really implying that we created it, I’m simply saying its New to us and I believe it is very Unique and I’m happy to be installing these Concrete WOOD Floors now.

MORE pictures located here.

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting my Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

We started this Project with Concrete that was about 20 years of age, it had several cracks and some stained area’s, part of the concrete was just added within the last year, so the colors of the two slabs of concrete was way different, my client wanted to have the cracks repaired and make the New and Old concrete colors blend together and look as one single slab, and that’s exactly what we did.

Our First task was to do some grinding, open the cracks up and get them repaired, after that we had to get the concrete prepped and ready for a Brand New Overlay with some Acid Staining. The Base coats went down great and the two large slabs of concrete now looked like they were the same color, the texture was a rock trowel, once the texture was on we put plastic on the home and the screened in patio area.

Next step was to Acid Stain the entire surface to pull it all together and marbleize the surface, we used a Chocolate and a Charcoal Colorant to add into our Antiquing Stains, so we were looking for a taupe color, once we had the color blend we were looking for we started the Acid Staining Process.

The Final step was to Lock it all in with a Quality Sealer and make the concrete look new and revived, I believe we saved the home owner from having to tear out and re-place the entire slab of Old Concrete which would have cost about 20k, needless to say they were very happy, please enjoy the pictures located here I will have a Video up very soon.

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting my Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

Started this Project with a good slab of concrete, it had some imperfections, like a few cracks we repaired, some light grinding, and it was a little wavey here and there, but overall it was in good shape.

I started by addressing the cracks in the slab by opening up the cracks with my v-blade attached to my hand held 4 inch grinder, cleaned the crack out real well and repaired it.

More info below the Video….

I came back in ground down some of the extra repair material, pressured washed, acid etched, ammonia rinsed and then pressure washed again, this concrete was repaired and thoroughly cleaned!

The next Step was to start the overlay process, I began by laying out the first grout coat color, followed by the second grout coat color, we went with a medium tone Chocolate color for the grout.

Once the grout coat was established the next day we came back in and taped out our 10inch boarder, then applied our tack coat over the tape with the grout coat to seal the tape and prevent any bleed under. (Blocks the top coat color since its a different color all together).

Now we are ready for a different Color to lay over top of these 3 coats of concrete and the fiber tape that’s now embedded within the last layer of concrete. This coat is a light palomino color which is sort of a light greeish/beige color, but it look good as you can see in the Video above, its the same color as the Texture coat, which is next.

ok now its ready for some texture, we apply the texture all with a trowel, which is very time consuming, this step took all day, well most of it. Ok so now we are ready to mask off the entire deck area, meaning the railing and the condo area, because the next step is Acid Staining the whole deck.

Acid staining, ok here we go… 2 pump up sprayers one with acid stain (brown chem-stone cut 5 to 1) the other is for water to allow the acid stain to disperse evenly, first the water very lightly then spray some acid stain, this technique makes it feather out naturally, and marbleizes very nicely!

I had to wait a few hours for the stain to react to the concrete overly, so I thought well why not hit the gym and kill a few hours, so I did… yes I was feeling a little like Rocky Balboa lol… anyway I came back pulled the fiber tape under my 3 coats of concrete, reveled my grout coat color and my 10 inch boarder came to Life!

Last day was just to come in clean it all up real nice and start mixing the sealer, 1 st coat goes down very quick and the color just pops!!,,,the second coat really pulls it all together, locks it down and now its shining bright like a diamond, very nice gloss!!… This outside deck at Seascape Condo’s in Osage Beach, MO is now saved and will go on to live a very long and happy life!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting my Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

On this Garage Epoxy Floor Project we started by removing the existing flooring of an adhesive backed checker board linoleum, we started out prying and pulling at it but it was so brittle it was breaking off in small pieces, so I pulled out our handy air powered scraping tool, and it pealed it up like a hot knife would cut through butta!!……….more info under the Video.

Once all the tile was up we proceeded to grind the entire floor with our 95% dustless vacuum system this step was all completed within 2 days, we came back in the 3rd day and started mixing our Tan colored Epoxy resin, once the epoxy was all down, we moved to the next step of the process.

The next step was to toss on my spiked shoes quickly and grab my bucket of vinyl chips and get out there on the freshly laid down epoxy and toss my chips in the air (as you may have seen in the Video above).
once all the chips were thrown on top at 100% coverage, I had to take the rest of the day off, and resume the next day.

The last day, we started by scraping and brooming off any lose vinyl chips, clean it up real well. Then proceed to the mixing of the clear epoxy resin, once mixing starts its game on again!!

Once the Clear Epoxy was on, it was clean up time, because this Epoxy Garage Floor Project in Four Season Missouri was Complete!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting my Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design