Comments Off on Concrete Flooring Bathroom Floor Metallic Epoxy | Shower Floor Concrete Overlay Lake Ozark MO
Hey this is Rick with custom concrete design and Lake of the Ozarks Missouri this week we are in Barnet and we’re doing this interior bathroom.
Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.
All right see you guys on the next one.
Hope you Enjoy the pictures and Video MORE pictures located HERE!!
Call me for a FREE Estimate.
OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!
Thank you for Visiting My Website, come back again soon….
Comments Off on Decorative Concrete Resurfacing Flagstone Condo Deck Lake Ozark
okay guys this week we’re in lake of the ozarks missouri down here at Palisades condo complex that’s a small deck it’s probably between 180 200 square feet I can’t remember it’s been a few months I bid it a few months ago when I bid it so well we’ve got bet all the grinding done I didn’t get my before video really so I guess this is it because there was a concreteoverlay already on here and I ground it off already so as you can see we’ve got still one crack there to repair it’s a small hairline crack nothing major I’ve already got the you know the perimeter taped off I’m not gonna paper anything until next week when we start spraying but it’s ready to go for the most part right now for a base coat of chocolate concrete we’re gonna do a couple of base coats dark chocolate so that’s going to be our grout coat and then I’m gonna spray our top coat next week and over the top of that really light tan top coat is going to be a highlight to highlight coats one white one black I don’t know if I mentioned but the pattern is flagstone.
So anyways this is kind of our I guess you could say our before video I to these all the time but normally I do them before this so this is it so I’m gonna get started all right the next steps what we’ve done basically I skipped a few steps in the video process you know the last video you know you guys saw the bare concrete what I’ve done since then I put two chocolates base coats down and then I taped out today I taped out my flagstone pattern and papered off the perimeter all around the condo unit here in the screened-in area so right now I’m getting ready to put it out put on what we call a lock coat or a tack coat it’s gonna go down over the top of this tape and we’re gonna lock this tape down so that that that final color because it’s lighter we don’t want it to bleed up underneath the tape so the tack coat is going to be sprayed on next to prevent that and then of course we’re gonna once the tack coat is down we’re gonna put a very light tan over the top of this and this is actually pretty dark and I’ll show you what I mean when this is sealed it’ll be very dark brown like that but it dries extremely light so we’ll have a very light coat that’ll get sprayed over the top at the very end very light tan coat and then I’ll probably do a black and a white highlight over the top of that just kind of dust it with that so you can still see you can barely see the black and the white but you’ll you know it’ll give it a little bit of character and a little bit of depth so that’ll be the final step before we lock everything down with a seal coat on Wednesday and then it’ll be done of course and I’ll do a final video then so okay we’ve got this tat coat down over our flagstone pattern now as you’ve seen from the previous video just before this I had it taped out and ready to go for that tack code it’s over the top now you could still see the tape a little bit in spots but for the most part that uh that tape seal
okay this job in Palisades yacht club condominiums like the use RX is finished just put the final coat of sealer on it about 30 maybe 45 minutes ago so if you guys are checking this out on YouTube be sure and subscribe to my channel so you don’t miss out on all the future videos that I do give the video a like if you like it and you like it well enough to leave a comment good or bad just let me know I tried to include most the steps in this video didn’t quite get them all but maybe on the next one I’ll do an actual live well not live footage but some footage of me actually spraying the stuff on or laying it down with trial and be sure and check out the links in the description below the video here they’ll take you over to my website as well a lot more information there see you guys in the next project
Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.
All right see you guys on the next one.
Hope you Enjoy the pictures and Video MORE pictures located HERE!!
Call me for a FREE Estimate.
OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!
Thank you for Visiting My Website, come back again soon….
Comments Off on Decorative Concrete Acid Stain Epoxy Basement Floor Camdenton, MO
This week we are at a house here in cane mint in Missouri right now we’re pulling up this linoleum and the baseboard all around and we got to start grinding up the glue over here we had a bunch of carpet on this side so we’ve gotta we’ve already pulled up the tack strips and we’ve got a once we get all the glue off we’re going to go ahead and start attaching all these tack strip holes in I’m sure we’ve got quite a few cracks up underneath of this glue as well so we’re going to have to get those repaired but there’s no telling what you got until you get the glue off so we’re going to come back in here we’re going to put down a Tuscan slate texture we’re going to use some umber acid stain and some brown acid stain and then we’re going to lock everything down once we get that all ready to go we’re going to lock everything down with some epoxy and get it looking like a brand new floor in here all right the grout code is about halfway down this is right before the color goes on we have the texture down now we’ve pulled up our tape it’s an 8 inch border and we’re getting ready to color this thing out as soon as we tape off the rest of the perimeter here get the back wall done but this is our Tuscan slate okay this floor is complete borders about eight inches wide texture is Tuscan slate used umber and brown chem Stone acid stain and you will get it locked down with a clear epoxy and hey if you guys are watching this on youtube please subscribe to my channel if you liked the video hit the like button if you like what you see here in the video then leave me a comment see you guys in the next project [Music]
If that’s, where you’re watching it and then go over to my facebook page, there’s. Links in the description below below this video, where you can go to my website and check out my Facebook page but yeah, if you guys, like this video, just hit that little like button below and leave me a comment.
Let me know what you think see you guys on the next project:
Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.
All right see you guys on the next one.
Hope you Enjoy the pictures and Video MORE pictures located HERE!!
Call me for a FREE Estimate.
OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!
Thank you for Visiting My Website, come back again soon….
Comments Off on Decorative Concrete Metallic Epoxy Sample Boards Base Coat
Hey guys, it’s right here today. What I’m gonna do is just put a black base coat on these boards. These are three simple words. I’m, getting ready to do for clients. I just said: go ahead and pour this, so this is our black base.
Normally, we always use this for our base. Go to our floors too, so that’s. What I’m gonna use on boards, so I’m gonna go ahead and premix our part, a I’ve got it over here, makes our part be up. Then I’m gonna mix.
The two together, along with the metallics and we’re, going to spread this on with a squeegee. We’re gonna be using about nine ounces, because I got about hardly nothing here. So nine ounces should cover this, probably a little bit more than what we need but use you, okay.
What I’ve done is I’ve, just mixed a part, A Part B at a two-to-one ratio. My metallics are in there and I mixed it for three minutes. So now I’m gonna go ahead and pour it out as equal as I can spread it around with our squeegee and then use a chip brush around the edges.
That’s. Basically it for today that’ll, be our base coat. We’ll, let it sit and we’ll come back tomorrow, you, okay, guys. The base goes on not much more. We can do. We’ll, just kind of let this move around a little bit and do its thing.
It won’t move a whole lot because put it on fairly thin. Put it a little bit thicker, but it’s, not super thin, so a little bit of movement. But finally, it’s on we’re gonna. Let it sit dry overnight and I’ll be back.
Take you to my Facebook page. You can check that out and also take you to my website. Entryways. Looking good [ Music ] see you guys on the next project:
Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.
All right see you guys on the next one.
Hope you Enjoy the pictures and Video MORE pictures located HERE!!
Call me for a FREE Estimate.
OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!
Thank you for Visiting My Website, come back again soon….
Comments Off on Decorative Concrete Overlay Latest Project – Concrete Network
This Project was completed in about 5 days from start to finish, we did a 20×20 Tile Pattern on the front stoop area, the grout color is brown, the top coat is a hunter green with brown and green colored acid stain on top, the texture is troweled on. then was sealed with 3 coats of or outside sealer called CSS Sealant, very durable sealer made to withstand whatever mother nature throws at it. The home owners were very happy.
About my blog
You can easily change this information in the Flexibility Theme Options page.
Simply type what you want to say and it will be displayed here!
