google.com, pub-1613111081024165, DIRECT, f08c47fec0942fa0

Decorative Concrete Tuscan Slate Texture Brown Antique Stain Lake Ozark, MO

Tuesday, November 30th, 2021 at 8:07 am 
Comments Off on Decorative Concrete Tuscan Slate Texture Brown Antique Stain Lake Ozark, MO

 

 

This week we’re over in Camdenton Greenview area in Lake of the Ozarks Missouri this is Rick custom concrete design got a lot of cracks to fix on this one we’ve already opened them up did a lot of grinding as you can tell right now we’re in the process of taking a railing off it’s a lot easier to work without the railing then work around it so I’m gonna take that off and we’ll go ahead and repair these cracks quite a few through just about every area of this concrete here besides a little bit probably a little bit worse than everything else it’s got a long one that runs all the way from here all the way on over and around and then it just kind of continues on this outer edge here got some pop marks as well here and there and there probably a good 15 maybe 30

 

I don’t know something like that we’re gonna get those repaired today and get everything cleaned up and have it ready for concrete tomorrow okay this is the day after the base coat today it’s going to get the texture coat on it which will be our tuscan slate after this step we’ll come back and antique it and then seal it and put the railing back up okay we have our tuscan slate texture on got the walls all prepped ready to go a couple minutes here I’m going to mix up the antiquing stain and get this thing sprayed it’s got a nice thick texture on it so it’s going to give us a nice 3d effect don’t forget that antiquing stain on there okay this job is done if you guys are watching this on YouTube please subscribe to my channel like the video if you liked it leave me a comment we’ll see you guys in the next project you

 

Let me know what you think see you guys on the next project:

Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.

All right see you guys on the next one.

Hope you Enjoy the pictures and Video

MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting My Website, come back again soon….

Rick LaFata

(573)-216-0930

rick@customconcretedesign.info

Custom Concrete Design

Read More: HIGH GLOSS Epoxy Garage Floor Vinyl Chips | Urethane TOP Coat Lake of the Ozarks, MO

 

Decorative Concrete Acid Stain Epoxy Basement Floor Camdenton, MO

Tuesday, November 30th, 2021 at 7:48 am 
Comments Off on Decorative Concrete Acid Stain Epoxy Basement Floor Camdenton, MO

This week we are at a house here in cane mint in Missouri right now we’re pulling up this linoleum and the baseboard all around and we got to start grinding up the glue over here we had a bunch of carpet on this side so we’ve gotta we’ve already pulled up the tack strips and we’ve got a once we get all the glue off we’re going to go ahead and start attaching all these tack strip holes in I’m sure we’ve got quite a few cracks up underneath of this glue as well so we’re going to have to get those repaired but there’s no telling what you got until you get the glue off so we’re going to come back in here we’re going to put down a Tuscan slate texture we’re going to use some umber acid stain and some brown acid stain and then we’re going to lock everything down once we get that all ready to go we’re going to lock everything down with some epoxy and get it looking like a brand new floor in here all right the grout code is about halfway down this is right before the color goes on we have the texture down now we’ve pulled up our tape it’s an 8 inch border and we’re getting ready to color this thing out as soon as we tape off the rest of the perimeter here get the back wall done but this is our Tuscan slate okay this floor is complete borders about eight inches wide texture is Tuscan slate used umber and brown chem Stone acid stain and you will get it locked down with a clear epoxy and hey if you guys are watching this on youtube please subscribe to my channel if you liked the video hit the like button if you like what you see here in the video then leave me a comment see you guys in the next project [Music]

If that’s, where you’re watching it and then go over to my facebook page, there’s. Links in the description below below this video, where you can go to my website and check out my Facebook page but yeah, if you guys, like this video, just hit that little like button below and leave me a comment.

Let me know what you think see you guys on the next project:

Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.

All right see you guys on the next one.

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting My Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design

 

Decorative Concrete Metallic Epoxy Sample Boards Base Coat

Saturday, May 29th, 2021 at 10:39 am 
Comments Off on Decorative Concrete Metallic Epoxy Sample Boards Base Coat

Hey guys, it’s right here today. What I’m gonna do is just put a black base coat on these boards. These are three simple words. I’m, getting ready to do for clients. I just said: go ahead and pour this, so this is our black base.

Normally, we always use this for our base. Go to our floors too, so that’s. What I’m gonna use on boards, so I’m gonna go ahead and premix our part, a I’ve got it over here, makes our part be up. Then I’m gonna mix.

The two together, along with the metallics and we’re, going to spread this on with a squeegee. We’re gonna be using about nine ounces, because I got about hardly nothing here. So nine ounces should cover this, probably a little bit more than what we need but use you, okay.

What I’ve done is I’ve, just mixed a part, A Part B at a two-to-one ratio. My metallics are in there and I mixed it for three minutes. So now I’m gonna go ahead and pour it out as equal as I can spread it around with our squeegee and then use a chip brush around the edges.

That’s. Basically it for today that’ll, be our base coat. We’ll, let it sit and we’ll come back tomorrow, you, okay, guys. The base goes on not much more. We can do. We’ll, just kind of let this move around a little bit and do its thing.

It won’t move a whole lot because put it on fairly thin. Put it a little bit thicker, but it’s, not super thin, so a little bit of movement. But finally, it’s on we’re gonna. Let it sit dry overnight and I’ll be back.

Take you to my Facebook page. You can check that out and also take you to my website. Entryways. Looking good [ Music ] see you guys on the next project:

Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.

All right see you guys on the next one.

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting My Website, come back again soon….

Rick LaFata
(573)-216-0930
rick@customconcretedesign.info
Custom Concrete Design