The problem is applying sealers to decorative concrete in extreme
temperatures. Both air and surface temperatureplay a role, but surface
temperature is typically more critical. After application, sealers undergo a
chemical reaction that causes them to cure and form a film. Temperature
plays a critical role. The best temperature range for applying sealers is 50
to 90 degrees

F. That 40-degree window is really not very big, especially when you’re working outside. This is why monitoring weather conditions
and looking at a thermometer should be mandatory before every sealer ap-application. Here’s what can happen if temperatures are too low or too high.

Low temperature – Every sealer has a minimum film forming temperature
(MFT). Most manufacturers specify 50 F minimum temperature to apply
sealers. If the temperature is at or slightly below the MFT, the chemistry of
the sealer is affected, the reaction slows down, and you get partial to no
film development. Bottom line: The sealer is weak and will not hold up very
long. If the temperature is really cold, film development stops altogether
and all you are left with is a white powder on the surface after the (solvent
or water) evaporates.

Read the rest of this entry

Acid Stain, Acid Staining, Concrete Floors, Chemical Resistant Coatings, Commercial Flooring, Concrete Coating, Concrete Coatings, Concrete Contractor, Concrete Finishes, Concrete Floor, Concrete Flooring, Concrete Floor Coating, Concrete Overlays, Concrete Refinishes, Concrete Repair, Concrete Restoration, Concrete Resurfacing, Custom Flooring, Decorative Concrete, Decorative Concrete Coating, Decorative Concrete Floor, Decorative Concrete Flooring, Decorative Concrete Overlay, Decorative Concrete Resurfacing, Custom Concrete Design, Epoxy Coating, Garage Floor, Epoxy Floor Coating, Epoxy Flooring, Epoxy Garage Floor, Floor Coating, Flooring Contractor, Flooring Ideas, Lake Ozark Concrete, Lake Ozark Concrete Floor, Concrete Flooring Lake Ozark, Osage Beach Concrete Floor, Osage Beach Flooring, Lake Ozark Flooring Contractors, Lake Ozark Flooring Installer, Marble Flooring, Painted Concrete, Protective coating company, Protective Coatings, Residential Flooring, Stamped Concrete, Tile Flooring, Wood Flooring

The Real Question…. Why Wouldn’t you use Decorative Concrete Overlays???

Decorative concrete is used on a large scale these days. You will find them almost everywhere starting from the interior of the house to the bridges and commercial roads. Well, there are several factors that have contributed to the popularity of these concretes. So, if you are looking to make a house or even to refurbish the old worn out concrete slabs, you should consider this option quite seriously.

The first and foremost advantage of the decorative concrete is the durability that it adds to the concrete. This has become even more important with the advent of new technologies in this field. These days, new decorative concretes are manufactured with enhanced technologies that creates lighter, faster and stronger cure. They start working faster and offer a wider range of protection to the concrete. Another great thing with these concretes is that, apart from increasing the aesthetic appeal of your house, these concretes will also value to the property. This will come handy when you will sell the house at a later time.

Though these two are very important in increasing the popularity of the Decorative concrete, they are not the only reasons why they are so much preferred by the home owners and designers. In fact, there are several other benefits of these concretes as well.

Read the rest of this entry