okay guys this week we’re in lake of the ozarks missouri down here at Palisades condo complex that’s a small deck it’s probably between 180 200 square feet I can’t remember it’s been a few months I bid it a few months ago when I bid it so well we’ve got bet all the grinding done I didn’t get my before video really so I guess this is it because there was a concrete overlay already on here and I ground it off already so as you can see we’ve got still one crack there to repair it’s a small hairline crack nothing major I’ve already got the you know the perimeter taped off I’m not gonna paper anything until next week when we start spraying but it’s ready to go for the most part right now for a base coat of chocolate concrete we’re gonna do a couple of base coats dark chocolate so that’s going to be our grout coat and then I’m gonna spray our top coat next week and over the top of that really light tan top coat is going to be a highlight to highlight coats one white one black I don’t know if I mentioned but the pattern is flagstone.

So anyways this is kind of our I guess you could say our before video I to these all the time but normally I do them before this so this is it so I’m gonna get started all right the next steps what we’ve done basically I skipped a few steps in the video process you know the last video you know you guys saw the bare concrete what I’ve done since then I put two chocolates base coats down and then I taped out today I taped out my flagstone pattern and papered off the perimeter all around the condo unit here in the screened-in area so right now I’m getting ready to put it out put on what we call a lock coat or a tack coat it’s gonna go down over the top of this tape and we’re gonna lock this tape down so that that that final color because it’s lighter we don’t want it to bleed up underneath the tape so the tack coat is going to be sprayed on next to prevent that and then of course we’re gonna once the tack coat is down we’re gonna put a very light tan over the top of this and this is actually pretty dark and I’ll show you what I mean when this is sealed it’ll be very dark brown like that but it dries extremely light so we’ll have a very light coat that’ll get sprayed over the top at the very end very light tan coat and then I’ll probably do a black and a white highlight over the top of that just kind of dust it with that so you can still see you can barely see the black and the white but you’ll you know it’ll give it a little bit of character and a little bit of depth so that’ll be the final step before we lock everything down with a seal coat on Wednesday and then it’ll be done of course and I’ll do a final video then so okay we’ve got this tat coat down over our flagstone pattern now as you’ve seen from the previous video just before this I had it taped out and ready to go for that tack code it’s over the top now you could still see the tape a little bit in spots but for the most part that uh that tape seal 

okay this job in Palisades yacht club condominiums like the use RX is finished just put the final coat of sealer on it about 30 maybe 45 minutes ago  so if you guys are checking this out on YouTube be sure and subscribe to my channel so you don’t miss out on all the future videos that I do give the video a like if you like it and you like it well enough to leave a comment good or bad just let me know I tried to include most the steps in this video didn’t quite get them all but maybe on the next one I’ll do an actual live well not live footage but some footage of me actually spraying the stuff on or laying it down with trial and be sure and check out the links in the description below the video here they’ll take you over to my website as well a lot more information there see you guys in the next project

Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.

All right see you guys on the next one.

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting My Website, come back again soon….

Read More: Decorative Concrete Tuscan Slate Texture Brown Antique Stain Lake Ozark, MO

Okay, this is Rick with custom, concrete design Lake of the Ozarks Missouri. This week I am in Lake of the Ozarks Missouri on the bagnell, damn strip at T LaFata’s Salon. This is my wife salon and the coming weeks I’m, going to be doing the entryway and a metallic epoxy, but this week I’m just working on this little slab here.

Obviously I already started the grinding there’s, a crack. I’m gonna have to repair there. I’m gonna get the rest of this grinding run, put a base coat on and we’re gonna tape out up wood pattern, so it’s.

Gon na gonna be wood planks and we’ll stain it make it look like wood and then we’re going to seal it down alright. Well, we got the pattern down. What I did was, as I did four inch planks. Orange width and then six inch width and then just kind of staggered, the length of it, and once we had the pattern down just sprayed over a basically what I call a tack coat, what it does is it seals that tape kind of locks, everything in so You know my next coat that goes over the top of it being that it’s.

Gon na be a different color. We don’t want that color to bleed up underneath to taint the tape and get on to our dark grout. So we put a tack coat down to basically seal that tape. You can kind of see the pattern all right.

We got this project finished up here at T the FATA salon, Lake of the Ozarks. I just finished up a Facebook live video, so if you guys are, if I’m friends with you on Facebook, be sure and tune in to my live videos.

Get notifications for those live videos. That way, when I do these things, because I’ve been doing more and more of them on each job for each step, but on this particular job. You guys know what we did, because you watched the previous videos, but we did the coloring yesterday and and then seal it up yesterday afternoon really turned out nice.

So you really can make concrete look like wood there. You go six-inch planks, four inch planks. All staggered different links and then I use three different colors. I use Bart Brown and an amber, and then I used those two colors to make.

My third color really turned out nice, though it’s, got some great texture to it. Give you a little bit more of a close-up here, made some not holes nail holes if you guys are on my youtube channel, make sure you get subscribed.

So you don’t miss any of my videos hit that little like button. If you liked the video leave me a comment, if you like the work, make sure you get subscribed as well, you don’t want to miss these videos because there’s, gonna, be some pretty cool ones coming up.

If you got any questions about this, that maybe I haven’t addressed in my videos here, leave me some comments below and I’ll get back to you with a reply. I don’t, give everything away necessarily on the video cuz.

Then it just makes it too long, and I really don’t. Do any how-to videos, although I could I don’t, but I may do some of those in the future. See you guys on the next project. Oh by the way below this, video will be probably a couple links one to my facebook page, so hit that and go like that page.

If you like my work, the other one is a link to my website. You can check out all the videos and all the projects I have before-and-after photos of all of them, so go check that out it’s, WW custom, concrete design, dot info.

Of course, the links are below so just click those and we’ll, see you guys on the next project: [: Music, ], okay. This is Rick with custom, concrete design Lake of the Ozarks Missouri. This week I am in Lake of the Ozarks Missouri on the bag, damn strip at teyla, father’s so long.

This is my wife salon and the coming weeks I’m, going to be doing the entryway and a metallic epoxy, but this week I’m just working on this little slab here. Obviously I already started the grinding there’s, a crack.

I’m gonna have to repair there. I’m gonna get the rest of this grinding run, put a base coat on and we’re gonna tape out up wood pattern, so it’s. Gon na gonna be wood planks and we’ll stain it make it look like wood and then we’re going to seal it down alright.

Well, we got the pattern down. What I did was, as I did four inch planks. Orange width and then six inch width and then just kind of staggered, the length of it, and once we had the pattern down just sprayed over a basically what I call a tack coat, what it does is it seals that tape kind of locks, everything in so You know my next coat that goes over the top of it being that it’s.

Gon na be a different color. We don’t want that color to bleed up underneath to taint the tape and get on to our dark grout. So we put a tack coat down to basically seal that tape. You can kind of see the pattern all right.

We got this project finished up here at T the FATA salon, Lake of the Ozarks. I just finished up a Facebook live video, so if you guys are, if I’m friends with you on Facebook, be sure and tune in to my live videos.

Get notifications for those live videos. That way, when I do these things, because I’ve been doing more and more of them on each job for each step, but on this particular job. You guys know what we did, because you watched the previous videos, but we did the coloring yesterday and and then seal it up yesterday afternoon really turned out nice.

So you really can make concrete look like wood there. You go six-inch planks, four inch planks. All staggered different links and then I use three different colors. I use Bart Brown and an amber, and then I used those two colors to make.

My third color really turned out nice, though it’s, got some great texture to it. Give you a little bit more of a close-up here, made some not holes nail holes if you guys are on my youtube channel, make sure you get subscribed.

So you don’t miss any of my videos hit that little like button. If you liked the video leave me a comment, if you like the work, make sure you get subscribed as well, you don’t want to miss these videos because there’s, gonna, be some pretty cool ones coming up.

If you got any questions about this, that maybe I haven’t addressed in my videos here, leave me some comments below and I’ll get back to you with a reply. I don’t, give everything away necessarily on the video cuz.

Then it just makes it too long, and I really don’t. Do any how-to videos, although I could I don’t, but I may do some of those in the future. See you guys on the next project. Oh by the way below this, video will be probably a couple links one to my facebook page, so hit that and go like that page.

If you like my work, the other one is a link to my website. You can check out all the videos and all the projects I have before-and-after photos of all of them, so go check that out it’s, WW custom, concrete design, dot info.

Of course, the links are below so just click those and we’ll, see you guys on the next project

Please subscribe to My YouTube Channel and uh like the video. If you like it, leave me a comment. Let me know what you think and hit that little bell, so you stay subscribed to my videos. Uh links are below to my facebook page and my website, where you can get more information.

All right see you guys on the next one.

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting My Website, come back again soon….

Source : Youtube