The Title Says it all currently we are the most viewed and talked about profile on Decorative Concrete Kingdom, click the Blue Highlighted words THAT READ–>> HINT–>> 😉 Decorative Concrete Kingdom and find out why we are getting so much traffic to our Profile page. Stay tuned updates are comin up soon!!!

Today we are on a job in Lake of the Ozarks off Highway W, we started our usual prep procedures on this project, the first thing we had to do was start grinding the surface and open up the cracks to repair we had to remove paint, and oils from the surface.

We also had to level up some low spots up next to the house they ran the full backside length of the patio once these spots were leveled up we ground everything flush, mixed up the muriatic acid, ammonia with water… Sprayed on muriatic acid and then neutralized it with ammonia water once this procedure was done we pressure washed it and mixed up our first bucket of concrete which is our base coat.

We laid out the base coat which is a lighter gray, once that was dry we had to put a second base coat on same color once dry we taped out our brick boarder, then rolled out our stencil and cut that stencil to fit the patio. Once the stencil was laid out and cut then placed next to our brick boarder we were ready to start mixing up our topcoat which is our brick red color fire up the compressor hook up the Hopper gun filled the Hopper and start spraying which you can see in the video below, once we had it sprayed out the whole patio was red and you could see our herringbone pattern.

Now we have our topcoat redbrick color sprayed on I wanted to highlight the entire project with a white and a black highlight coats so we mixed up our white coat sprayed small specs which is our highlight coat on the entire surface and then repeated the same procedure with our black highlight coat.

So we have our prep work done the base coats on, our stencil laid out and cut to fit the patio our topcoat on, highlight coats done, we are ready to pull our stencil, pull our brick tape around the perimeter to reveal our pattern and our base coat below.

Next step was to mix up our antique stain we used the darker brick color and a very dark charcoal color and went through the entire pattern coloring random bricks charcoal and the darker brick red. Once I had an even, but random look it was time to mix up our sealer and add 2 coats of our premium outside sealer to lock this job down.

I believe our customer was quite surprised at the complete makeover that this patio went through going from a plain field of gray concrete broom finish texture to having an entirely brick laid look and custom patio.

Another Concrete Surface Saved and Beautified by Custom Concrete Design!

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting my Website, come back again soon….

This is a basic two-car garage in a new construction home, our plan was to turn it into a Decorative Epoxy Garage Floor, but the garage was in great shape all we needed to do was come in and remove paint and drywall mud, we pulled out the walk behind and hand grinders and went to work profiling the entire surface, once we had the garage floor profiled the way we needed it to be we cleaned it up with muriatic acid, ammonia water and pressure washed it, then we set the fans so that it could dry out for the night.

We came back the next day set up our canopy because it looked like rain, we started to mix our base coat and it started to sprinkle…. after that but we kept moving forward we got our colored epoxy coat down once that coat was down I put on my spike shoes and grabbed my vinyl chips that we pre-filled in a 5 gallon bucket, I ran to the front of the garage with my chips and continued to broadcast out the vinyl chips at 100% coverage making sure that everything was completely caked on and saturated. Once the vinyl chips were down the only thing left to do was to clean up let the floor cure out and come back the next day.

The next day we scraped the floor flat removing all loose chips and made sure everything was consistent, once this step was done it was time to mix up the clear epoxy and apply it, the application was a smooth process and it came out great so we cleaned up and went home.

The next day we came back put on two coats of wax and this job is good to go!!

Another Concrete Surface Saved and Beautified by Custom Concrete Design!

Hope you Enjoy the pictures and Video
MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting my Website, come back again soon….

This week we were down Horseshoe Bend in Lake of the Ozark, MO… This project was pretty simple once we got past the Epoxy that was put on the outside suspended deck, it was on there pretty good…. the grinders we used did a great Job as usual, but so did the muscle behind the grinder, we always win so this deck coating really had no chance haha

Grinding the Epoxy off we did start to see more and more cracks appear, these cracks were not repaired before the epoxy went on so most of the cracks never showed up until the Epoxy was coming off, looks like the material just filled in the area’s where cracks were present, so now the coating is off we had to open up the cracks some to remove loose material so we could fill it with our crack repair material… Awesome stuff works GREAT!!

Cracks are repaired now it was time to start the overlay, we laid out our base coat of charcoal colorant, it looked great, the next day we came back and started taping the pattern, on this one we hand taped a Ashler slate type pattern, once we got the look we wanted we had to prep up the walls and railing from any over spray of concrete material, next was what we call the tack coat…its a layer that goes over the fiber tape to help keep the top coat from bleeding under the fiber tape, we do NOT want that to happen. ok Tack coat is sprayed on… time to go home for the day.

The next day we came in and started out texture coat which IS the most popular of texture coats that we do “THE TUSCAN SLATE” so we get that coat on once dry we pull the tape and clean it up… looks great!

Next step was to make sure everything is still taped up well from over spray but this time it was not going to be over spray from Concrete, now its time for the Antique Acid Stain, once I mixed it up checked to make sure everything was covered I started spraying it on with my pump up sprayer, we had to do a few coats till I got the look I was after… done let it sit and do its thing.

Looks great so now we need to pick out random squares to hand paint with sponge brushes two different colors one Slate grey Antique Acid (slight blueish tint) and a grey that was pretty standard just a medium grey… a lot of this is shown in the Video at the bottom of this page or click the Red Video Tab at the Top to watch it. So now we have all the squares colored that we want, again this was just random no real pattern, just wanted it to look kinda proportioned.

Ready for SEALER!!… we mixed up our premium sealer and laid down 2 coats with a roller, pretty simple the only thing left was to shoot the final Video and take some pictures and this Job was DONE!!

Another Concrete Surface Saved and Beautified by Custom Concrete Design!

Hope you Enjoy the pictures and Video

MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting my Website, come back again soon….

First off I want to thank the Crocker Fire-station for calling me about his project Last fall, this project has been a long time in the works, a lot more for them than myself, but it all came together this year and Congratulations to them the New Fire-station looks great and you guys deserve it!

We came in the first day to get all our prep work done, this was a great slab of concrete and it had a few minor cracks we had to repair and but other than that the floor was in great shape, but of course we still had to shot blast it and get it ready for the Epoxy coating that was to come.

It took us about 2 days to get it all prepped and ready for the Epoxy but we got-er done, once we had it ready for Epoxy we mixed up our first batch and started laying it down, it took all day for just one coat…this place is HUGE about 3800sqft and it was just the 2 of us. we came back and did a second coat the next day…once again an all day deal.

Now that we had the 2 coats on it was time to lay out the Yellow colored Traffic Strips so we broke out the tape measures and Tape and started in at like 3am in the morning the next day, we were running a little low on sleep for this one but we got it done and we were headed home by 11am.

Another Concrete Surface Saved and Beautified by Custom Concrete Design!

Hope you Enjoy the pictures and Video

MORE pictures located HERE!!

Call me for a FREE Estimate.

OR – You can Fill out this Convenient Contact form located HERE and I will Contact YOU!!

Thank you for Visiting my Website, come back again soon….